Updated version, working Core2 web radio player, M5Stack
When I first tried homeuser33's code I used the M5Stack OEM board: M5Stack Arduino>M5Stack-Core2 (The PSRAM is enabled). It kept rebooting itself. I then switched to ESP32 Arduino>M5Stack-Core2 (The PSRAM is enabled as well), it then worked. Today, I tried different combinations.
Pure Micro Python without Ui-Flow on my M5Stack core2
The latest lv_micropython can be built for the 'M5CORE2'-board. (I used ESP-IDF v4.0.2 on Ubuntu 20.04) Stuff I tested successfully on my M5Core2: display with lvgl widgets touchscreen WLAN RTC SDCard (read) Might be interesting for people searching pur...
Looking for Factory Test Source code for Core2 | M5Stack …
2021年12月23日 · Where can I find the source code for the Factory Test Project for the Core2 under arduino? I just bought my first M5Stack Core2 and am trying to get my head around the programming environment. Thank you in advance.---Joe
LVGL on Core2 with arduino - M5Stack Community
I got LVGL to compile for esp32, but to get it to show something on the lcd on the Core2 was not that simple... There is examples with the M5Stack, but not for the Core2. Have been installing stuff, and deleting things and editing conf files and whatnot... I'm so tired of trying that I don't know what I'm doing any more.
Convert Core code to Core2 - M5Stack Community
How can I change this code so it compiles for M5Stack-Core2 AWS instead of M5Stack-Core? I tried replacing the M5Stack.h include with M5Core2.h but it didn't help. I also tried adding the latter to the first, but it also didn't help. Thanks!
M5Stack Core2 "Restart On" block not working v1.7.8
When using the M5Stack Core 2 with firmware 1.7.8 the "Restart On" and the "Restart After" blocks under the "Power" collection just seem to power the device off. I end needing to reset the device to get it to power back on
M5stack core2 control 12 channel Servo module
This topic has been deleted. Only users with topic management privileges can see it.
Get TFT_eSPI working on Core2 - M5Stack Community
2023年3月30日 · Open the "User_Setup.h" file in the TFT_eSPI library's "User_Setups" directory and modify the settings to match your M5Stack Core2 hardware. Specifically, you need to configure the display type, pins used for communication, and other settings as …
GoPlus2 Module and Core2 for AWS | M5Stack Community
@ciconde I have an M5Stack Core2 AWS working with the GoPlus2. I'm using Arduino not the UIflow. The issue I worked around was that the Wire Bus there are two I2C buses on the Core2. The demo code is set for Wire.begin() which is the wrong bus for the Core2.
IoT BASE cycles continuously (Core2 stacked on top)
2023年11月4日 · I have taken the stock example for the IoT BASE and updated it for the Core2. Similarly, it has been modified to remove the MQTT functions, for now, to just allow AT commands for debug. I changed IoT BASE library changed for pin 27 (instead of 12 for the orginal Core).